88843088 - 88843025 - 88848075 - 88843137 - 09122038368 info@hlcgroup.ir

فلومتر محصولات

Liquid turbine flowmeter

ارسال شده توسط پشتیبانی

فلومتر توربین مایع / Liquid turbine flowmeter

در فلومتر توربینی از انرژی مکانیکی سیال به منظور چرخش پره ها استفاده میشود. هنگامی که مایع سریعتر حرکت می کند ، چرخش روتور نیز سریعتر است. در فلومتر های توربینی بوسیله یک سنسور تعداد دوران پره اندازه گیری می گردد. میزان دوران پره نسبت مستقیم با میزان دبی سیال داشته و می توان با ضرایب مشخص دبی سیال را با دقت بالا نمایش داد. این نوع فلومترها به دو صورت In Line و Insertion قابل ارائه می باشند.

Liquid turbine flowmeter

Product Description

 LWGY series liquid turbine flowmeter are introduced

۱, this LWGY series turbine flowmeter is by flow sensor and display meter component is the abroad advanced technology production, is the ideal liquid measure one of flow meter. Flowmeter has simple structure, high precision, installation maintenance convenient use, etc. The products are widely used in oil, chemical industry, metallurgy, water supply, paper making, environmental protection, food, and other fields, suitable for measuring the closed in the pipe and no fiber, particle impurity liquid. Especially suitable for and secondary display, PLC, DCS control system with the use of the computer, also can achieve automatic quantitative control, excessive alarm such use, is the ideal energy flow and instrument.

The product features:

 1. The sensor bearing push type so far, not only ensure accuracy, and improve its performance.

 2. Simple structure, firm and tear open outfit is convenient, applicable high pressure measurement.

 3. Wide measuring range, the diameter of 1:20, for small “, floor lower velocity.

 4. The pressure loss small, repeatability, short-term repeatability could reach 0.05% ~ 0.2%. High precision, the general of plus or minus 1%, plus or minus 0.5%, high precision type of plus or minus 0.2%.

۵٫ The output pulse frequency signal, and is suitable for transient flow, accumulated measurement, no zero drift, strong anti-interference ability.

main technical performance:

۱٫ The nominal diameter: (4-200) mm basic parameters and selection of that see (table 1).

۲٫ The temperature of the medium: standard (20-80)C; High-temperature type (20-120)C.

۳٫ Environmental temperature: (20C)-to 55. 4. Must have the accuracy of the specific) : (plus or minus 0.2%, plus or minus 0.5%, plus or minus 1%.

The basic parameters and technical performance

 1,Meter diameter and connection :4, 6, 10, 15, 20, 25, 32, 40 using thread connection /  (15, 20, 25, 32, 40) 50, 65, 80, 100, 125, 150, 200 using flange connection

 2,accuracy class :+/-1%R, +/-0.5%R

۳,Span ratio:1:10;1:15;1:20

۴,Instrument material:304 stainless steel, 316 (L) stainless steel, etc

۵,Tested medium temperature (C):-20~+120 C

۶,environment condition:Temperature-10 ~ + 55C, relative humidity 5% ~ 90%, the atmospheric pressure 86 ~ 106 Kpa

۷,output signal:Pulse frequency signal, low level than 0.8 V quartile high level 8 V

۸,Power Supply:+ 12 VDC, + 24 VDC (optional)

۹,Signal transmission lines:STVPV3 x 0.3 (three wire)

۱۰,transmission range:1000m

۱۱,Line interface:Threaded M20 x 1.5

۱۲,anti-hazard classification:ExdIIBT6


نمونه واردات تجهیزات ابزار دقیق و اتوماسیون صنعتی

Endress Hauser , E+H , Hach Lange , Supcon , Rosemount , Kobold , Wika , JUMO , Fluke , Asco , Siemense , Honeywell , Advantech , NI , Moxa , Adlink , National Instrument , JIT , MCC , HBM , Omega , Soway , TML , CTC , Vishay

برچسب , ,

  • دسامبر 7, 2016

منتظر شما در کانال تلگرام شرکت هستیم

می خواهم از قیمت محصولات جدید مطلع شوم