88843088 - 88843025 - 88848075 - 88843137 - 09122038368 info@hlcgroup.ir



ارسال شده توسط پشتیبانی

  ماژول SC-002  مبدل جریان به ولتاژ است.



Voltage to current module 0-2.5 / 3.3 / 5/10/15 / 24V turn 0-20mA rail installation

Product Features

A: to achieve 0 ~ 2.5 / 3.3V / 5V / 10V / 12V / 15V / 24V and other voltage signal is converted to 4 ~ 20ma

    Or 0 ~ 20ma current signal (more than several voltage signals are several typical values, you can

    For any other voltage value, such as 0 ~ 6.5V turn 4 ~ 20ma)

B: 0V corresponds to 4ma or 0ma, 2.5 / 3.3V / 5V / 12V / 24V corresponds to 20ma, the voltage and current

    Fully linear, to meet the national standard signal requirements

C: zero adjustment: adjust the current corresponding to the size of 0V, can be higher or lower than 4ma

    Range adjustment: adjust the input voltage corresponding to the maximum current size, can be higher than

 Working power

Power supply 12V ~ 24V wide power supply, convenient from the microcontroller, PLC and other modules to take power


Power supply: positive then VCC, negative then GND

Current output: current output connected to the sampling module, the figure with the load that

Control voltage: control voltage is the need to convert the voltage signal, the positive then voltage input

(Module commissioning wiring diagram)

A: Connect the power supply, positive to VCC, negative to GND

B: The current output is connected to the required engineering equipment and can be calibrated to access the measuring instrument

   (Such as current output termination ammeter positive ammeter negative access to GND, the formation of the loop)

C: Connect the control voltage, the control voltage is connected to the voltage input, the cathode is connected to GND, according to figure connection

    Voltmeter to facilitate measurement of control voltage size

D: adjust the control voltage is 0V, at this time to adjust the zero adjustment potentiometer to test the ammeter current

    For 4ma

E: Adjust the control voltage to the required maximum voltage (such as 2.5V / 3.3V / 5V / 12V / 24V, etc.)

    At this time to adjust the range adjustment potentiometer to test the ammeter output current of 20ma

F: Debugging is complete


نمونه واردات تجهیزات ابزار دقیق و اتوماسیون صنعتی

Endress Hauser , E+H , Hach Lange , Supcon , Rosemount , Kobold , Wika , JUMO , Fluke , Asco , Siemense , Honeywell , Advantech , NI , Moxa , Adlink , National Instrument , JIT , MCC , HBM , Omega , Soway , TML , CTC , Vishay

برچسب , ,

  • نوامبر 24, 2016

منتظر شما در کانال تلگرام شرکت هستیم

می خواهم از قیمت محصولات جدید مطلع شوم